Re Bar Rolling Mills Plants.

Turnkey Solutions for Hot Rolling Mill

Preet Machine Limited provides complete turnkey project solutions in Designing, Manufacturing & Mill Commissioning for Re-Bar Rolling Mill, Wire Rod Rolling Mill and Section Rolling Mill.

Our Plant Capacity for Re-Bar Rolling Mill, Wire Rod Rolling Mill and Section Rolling Mill.
Re-Bar Rolling Mill Capacity upto 300,000 to 500,000 TPA


Furnace Capacity of 50 to 100 TPH.
Roughing Rolling Mill Complex with six Housing Less / Pre-Stress shiftable type continuous stands (Horizontal and Vertical) of 560 mm depending on the Rolling mill capacity.
Intermediate Rolling Mill Complex with six Housing Less / Pre-Stress shiftable type continuous stands 410/360mm
Finishing Rolling Mill Complex with six Housing Less / Pre-Stress shiftable type continuous stands of 360mm
Housingless Rolling Mill Stands with constant pass line
Slit Rolling or Multi Strand Rolling.
TMT line
Crank type start stop shears
Braking slides / Lifting aprons
Automatic cooling bed with layer transfer
Cold Shear
Bar finishing area with counter, bundling machine

Back to Top
Re-Bar Rolling Mill Capacity upto 200,000 TPA


Furnace capacity of 30 to 40 TPH.
Roughing Rolling Mill Complex with Single Stand of 560mm
First Intermediate Rolling Mill Complex with 2 Continuous Shiftable type Stands of 410mm
Second Intermediate Rolling Mill Complex with 4 continuous Shiftable type stands of 360mm
Finishing Rolling Mill Complex with 6 continuous Shiftable type stands of 310mm
(Housing Less / Pre Stress, Shiftable Type Stands for constant pass line feature)
TMT Line
Continuous operarting shears and crank shears
Pinch rolls and Tail braking pinch rolls
Twin channels, automatic cooling bed with layer transfer
Cold shear
Bar finishing area with counter, bundling machine

Back to Top
Re-Bar Rolling Mill Capacity up to 100,000 - 125,000 TPA


Furnace capacity 25TPH
Roughing Rolling Mill Complex with 460mm 2 stands
First Intermediate Rolling Mill Complex with 2 Pre-stress Type Shiftable Rolling Mill Stands 360mm Continuous Type
Second Intermediate Rolling Mill Complex with 4 Pre-stress Type Shiftable Rolling Mill Stands 320mm Continuous Type
Finishing Rolling Mill Complex with 6 Pre-stress Type Shiftable Rolling Mill Stands 260mm continuous Type
Automatic Cooling Bed and Twin Channel Delivery Systems
Re-Bar Rolling Mill is specially equiped with direct drive crop and cobble shears, TMT line and TMT shear, Braking pinch roll, twin channel and cold shear.

Back to Top
Re-Bar Rolling Mill Capacity up to 60,000 - 80,000 TPA


Furnace Capacity 16/20 TPH
Roughing Rolling Mill Complex with 460mm 3 Stands 460mm (18�) with AC Drive
We have following Intermediate Rolling Mill Complex options
1. Intermediate Rolling Mill with 4 Pre-Stress type shiftable Rolling Mill Stands of 280mm - single A.C. Drive with speed increaser
2. Intermediate Rolling Mill with 4 Pre-Stress type shiftable Rolling Mill Stands of 280mm-single A.C. Drive
3. Intermediate Rolling Mill with 6 Pre-Stress type shiftable Rolling Mill Stands of 280mm-single A.C. Drive with speed increaser
Finishing Rolling Mill Complex with 6 Rolling Mill Stands 0f 260mm-Indivudual Drives
Manual Cooling Bed and Twin Channel Delivery Systems
Optional : Automatic Cooling Bed and Twin Channel Delivery Systems