Skip to content

History of Rizhao Steel | 2003–2025 Company Timeline

Rizhao Steel Holding Group

Rizhao Steel Holding Group is a privately owned steelmaker in Rizhao, Shandong Province, founded in 2003 and controlled by Du Shuanghua. It should not be confused with Shandong Iron & Steel Group Rizhao Co Ltd (SD Steel Rizhao), a separate state-owned works in the same city, built by Shandong Iron & Steel Group and since 2024 also part-owned by Baosteel (see the History of Shandong).

In 2025, Rizhao Steel was the 23rd-largest steelmaker in the world, producing about 17.0 million tonnes (Mt) of liquid steel (worldsteel).

Rizhao Steel Timeline

  • Independent Foundation (2003): Rizhao Steel established in Shandong Province as private enterprise under Du Shuanghua, positioned as major non-state steel producer in China's growing market
  • Takeover Attempt (2008–2012): Shandong Steel Group signed a letter of intent (November 2008) and a restructuring agreement (6 September 2009) to take 67% of a new Rizhao company, and a revised one-off buyout was agreed in August 2010; disputes over valuation and funding meant the deal was never completed, and Rizhao Steel stayed under Du's control. An arbitrator awarded Mount Gibson US$114m in damages over a 2007 iron ore supply contract (2010)
  • Technology Investment (2013–2014): Major modernisation with three new Arvedi ESP plants (2.55 Mt/yr each), ordered Andritz pickling and galvanising line, signed Primetals contract for two additional ESP lines (1.7 Mt capacity each)
  • Strategic Consolidation (2019): Contemplated consolidation with three other Chinese steel mills including Weifang Special Steel Group, Luli Iron & Steel and Juneng Special Steel for coastal relocation strategy
  • Capacity Expansion (2020–2022): Commenced CNY33bn expansion to 17 Mt steelmaking capacity with new blast furnaces and converters, acquired controlling stakes in Minmetals Yingkou Medium Plate and Zibo Qilinfushan Iron & Steel
  • Overseas Investment (2023): Rizhao Chairman Du Shuanghua's Bright Ruby Resources won the tender for Singapore's Far East Shopping Centre at S$908m (about US$666m); the sale fell through in April 2024 when planning approval was not granted (press reports)
  • Divestment and Automation (2024–2025): Yingkou plate mill sold to Jingye Group, 95% automation rate achieved in steelmaking with Primetals support
The timeline shows one of China's largest private steelmakers resisting a state-led takeover and then expanding on its own account. The state-owned Shandong group built its own coastal works at Rizhao instead.

The timeline below covers the history of the firm.

  • 2003: Rizhao Steel established in 2003.
  • 2008: Signs letter of intent for takeover by Shandong Steel Group.
  • 2009: Agrees restructuring under which Shandong Steel would hold 67% of a new Rizhao company (not completed).
  • 2010: Revised agreement for a one-off buyout by Shandong Steel (not completed).
  • 2010: Arbitrator awards Mount Gibson US$114m in damages against Rizhao over a 2007 iron ore supply contract.
  • 2013: Invests in three new Arvedi ESP plants, each with 2.55 Mt/yr capacity.
  • 2014: Orders pickling and galvanising line from Andritz.
  • 2014: Signs Siemens VAI (now Primetals Technologies) contract for 2 more ESP lines, each with 1.7 Mt capacity.
  • 2019: Contemplates consolidation with three other Chinese steel mills.
  • 2020: Commences capacity expansion to 17 Mt steelmaking.
  • 2021: Acquires controlling stake in Minmetals Yingkou Medium Plate Co.
  • 2021: Capacity plans set final steelmaking capacity at 18.95 Mt/yr.
  • 2022: Acquires 51% stake in Shandong-based Zibo Qilinfushan Iron & Steel Co.
  • 2023: Rizhao Chairman Du Shuanghua's Bright Ruby Resources wins the tender for Singapore's Far East Shopping Centre at S$908m (about US$666m); the sale falls through in April 2024 (press reports).
  • 2024: Jingye Group acquires Rizhao Steel Yingkou Medium Steel Plate Mill.
  • 2024: Rizhao Section Steel becomes a wholly owned subsidiary.
  • 2025: Rizhao Steel attains 95% automation rate in steelmaking.

Notes
  • 2007: Rizhao Steel and Mount Gibson sign 15-year contract under which Rizhao commits to purchase up to 1.5 million tonnes of iron ore every year from Mount Gibson. See further comment under year 2010 below.
  • 2008–2009: Shandong Steel Group signed a letter of intent to take over Rizhao Steel in November 2008. The move was seen at the time as part of a state push to consolidate the industry, and it raised concerns about state firms absorbing profitable private ones. In May 2009 Du Shuanghua placed about 30% of Rizhao's assets into Hong Kong-listed Kai Yuan Holdings, which raised the valuation and made the deal harder to finance. On 6 September 2009 the two sides agreed that Shandong Steel would contribute cash for 67%, and Rizhao Steel its appraised net assets for 33%, of a new company, Shandong Iron & Steel Group Rizhao Co Ltd. Du was to lease and run the Rizhao works during a transition period.
  • 2010–2012: A second agreement on 30 August 2010 replaced the joint-venture plan with a one-off purchase of Rizhao Steel's assets, targeted for 30 November 2010. Deadlines slipped into 2011. The two sides could not agree a valuation, and Shandong Steel could not raise the funding (press-reported, March 2011). By May 2012 the restructuring had made little progress, and Shandong Steel had turned its attention to Qingdao Steel. The takeover was never completed, and Du Shuanghua remained Rizhao Steel's controlling shareholder (press-reported, February 2025). Shandong Steel instead built its own greenfield works at Rizhao, Shandong Iron & Steel Group Rizhao Co Ltd. It was approved by the NDRC in April 2013 with 8.5 Mt/yr of steelmaking capacity, and its first blast furnace was blown in on 18 December 2017. Baosteel acquired 48.61% of that company from Shandong Iron & Steel Group in January 2024.
  • 2010: An arbitrator found that Rizhao Steel Holding Group had repudiated its 2007 long-term iron ore purchase contract with Mount Gibson Iron and awarded Mount Gibson US$114m in damages plus interest and costs (August 2010). The dispute was settled in October 2011 through two new off-take agreements.
  • 2011: Acquires 45.96% of Minmetals Yingkou Medium Plate, with China Minmetals keeping the remaining 54.04%.
  • 2013: Endless strip production (ESP) lines 1, 2 and 3, each with a strip width of 1,600 mm came into operation in 2015. Lines 4 and 5, ordered in 2014, with strip widths of 1,300 mm, were commissioned in 2016. On all five lines (which have a combined capacity of 11 Mt), strip is rolled to a minimum thickness of 0.8 mm.
  • 2014: Andritz pickling and galvanising line (a multi-process line) produced 700,000 tonnes of galvanised steel annually.
  • 2019: According to press reports, these consolidation discussions involved the Weifang Special Steel Group, Luli Iron & Steel and Juneng Special Steel as well as Rizhao Iron & Steel; with a central topic being relocation of steelmaking plant and equipment to Rizhao (which is a coastal location). Weifang, Luli and Juneng in 2019 had a combined pig iron capacity of ~6.7 million tonnes a year and crude steel capacity of ~9 million tonnes a year.
  • 2020: Rizhao Steel expansion project commencing in 2020 is to cost CNY33bn, and allow Rizhao to attain steelmaking capacity of 17 Mt/yr. The project is expected to be complete in 2022 and includes construction of two 3,000 m3 blast furnaces and two 300 t converters. Debt funding for the investment is to be largely provided by China CITIC Bank.
  • 2021: Rizhao buys China Minmetals' remaining 54.04% of Minmetals Yingkou Medium Plate, reaching 100% ownership of the business. Minmetals Yingkou Medium Plate Co Ltd manufactures and processes steel products including carbon structural, building structural, pressure vessel, hull structural, pipeline and copper-clad steels.
  • 2021: Rizhao Steel's 2021 capacity-planning documents give final capacities of 18.95 Mt/yr of steelmaking, 20.30 Mt/yr of ironmaking and 21.34 Mt/yr of rolling, above the 17 Mt/yr steelmaking target set in 2020. Related projects continued after 2022.
  • 2022: Equity stake in Zibo Qilinfushan Iron and Steel was acquired in mid-2022 from the Zibo Fushan Enterprise Group Co Ltd.
  • 2024: Jingye purchased 100% equity in the plate and longs maker from Rizhao Steel Holding Group Co (Rizhao Steel), in a transaction approved by the Beijing Municipal Market Regulation Administration. Located in Northeast China's Liaoning province, Rizhao Steel Yingkou Medium Plate has a medium plate production capacity of 6 Mt/yr and 2 Mt/yr of wire rod production capacity.
  • 2024: Rizhao Steel Holding Group raised its stake in Rizhao Section Steel from 70% to 100% in August 2024. SteelOrbis gave the group's annual steel capacity as 18.95 Mt.
  • 2025: With assistance from UK-based Primetals, implementation of advanced process automation and digital control systems was key in attaining this 95% automation level.

Researching a steel company for a deal? Our Due Diligence Service → Discuss a Project →