Skip to content

Steel Content of Products | Cars, Appliances and Infrastructure

How Much Steel Is in Everyday Products and Infrastructure?

A typical petrol or diesel car contains about 830 kg of steel, a battery-electric car about 767 kg, a household refrigerator about 36–69 kg, a main battle tank about 55 tonnes and a 48-inch gas pipeline about 565 tonnes per kilometre. This page sets out the steel content of about 50 products and structures, from bicycles and washing machines to bridges, wind turbines and data centres, with the unit, the basis and the source for each figure.

Key Facts

  • Steel content on this page means the steel in the finished product or structure. It excludes steel lost as scrap during manufacture.
  • Cars are about 58% steel by weight; household appliances typically 50–75%.
  • The steel bought to make a product is higher: about 1.85 tonnes for every tonne of steel in a car. See indirect steel demand coefficients.
  • Each figure is marked as published (named source), calculated (from standard dimensions) or MCI estimate (Metals Consulting International, where no reliable published figure was found).
  • Data as of November 2026.

The figures are consistent with our steel end-use analysis 2025, which uses many of them to divide world steel demand of about 1.7 billion tonnes between sectors. For headline demand by region and product shape, see our steel demand analysis 2025.


Steel Content by Product and Structure

Vehicles and Transport Equipment

Steel Content of Vehicles and Transport Equipment
ProductSteel ContentUnitBasisRef.
Passenger car, petrol or diesel (1,440 kg)830kg per carPublished1, 2, 3
Passenger car, battery-electric767kg per carPublished1
Light commercial vehicle (van, pickup)~1,005kg per vehiclePublished1
Heavy truck~3,250kg per vehiclePublished1
Bus or coach (12 m)~8,100kg per vehiclePublished1
Motorcycle, mid-size80–110kg per motorcycleMCI estimate–
Bicycle, steel frame~18kg per bicycleMCI estimate–
Bicycle, market average (mixed materials)~6.5kg per bicycleMCI estimate–
Railway passenger coach20–30tonnes per coachMCI estimate–
Railway freight wagon15–25tonnes per wagonMCI estimate–
Merchant ship~0.2tonnes per deadweight tonnePublished1
Shipping container, 20 ft (tare 2.2–2.3 t)~1.75tonnes per containerPublished1, 8
Shipping container, 40 ft (tare ~3.75 t)~2.9tonnes per containerMCI estimate8

The battery-electric figure has the same 667 kg of flat steel as a petrol car but about 63 kg less engineering bar, and makes no extra allowance for battery enclosures; see automotive steel weight and the automotive assumptions in the end-use analysis. Shipping containers are weathering steel apart from the plywood floor. Data as of November 2026.

Household Appliances

Steel Content of Household Appliances
ProductSteel ContentUnitBasisRef.
Refrigerator, top and bottom freezer36kg per unitPublished4
Refrigerator, side by side69kg per unitPublished4
Washing machine, top-loading~43kg per unitPublished5
Clothes dryer, electric~49kg per unitPublished5
Cooker / range, electric48kg per unitPublished4
Cooker / range, gas68kg per unitPublished4
Room air conditioner16kg per unitPublished4
Dishwasher12–25kg per unitMCI estimate–
Microwave oven~13kg per unitMCI estimate–

US appliance sizes; European models are often smaller and lighter. Front-loading washing machines also carry a concrete counterweight, which is not steel. See the domestic appliances assumptions in the end-use analysis. Data as of November 2026.

Defence Equipment

Steel Content of Defence Equipment
ProductSteel ContentUnitBasisRef.
Main battle tank~55tonnes per tankPublished1
Infantry fighting / armoured personnel vehicle~10tonnes per vehiclePublished1
Self-propelled artillery~30tonnes per unitPublished1
Warship or submarine~45%of displacementPublished1
155 mm artillery shell (43.2 kg)~36kg per shellPublished1
Military aircraft~1.5tonnes per aircraftPublished1
Drone~5%of weightMCI estimate–

A submarine of 7,400 t displacement would contain about 3,300 t of steel on this basis; submarine pressure hulls may be above the warship average. See the defence assumptions in the end-use analysis. Data as of November 2026.

Energy, Pipelines and Offshore

Steel Content of Energy Infrastructure
StructureSteel ContentUnitBasisRef.
Gas pipeline, 48 inch (1,219 mm × 19.1 mm wall)565tonnes per kmCalculatedMethod
Gas pipeline, 42 inch (1,067 mm × 17.5 mm)453tonnes per kmCalculatedMethod
Gas pipeline, 36 inch (914 mm × 15.9 mm)352tonnes per kmCalculatedMethod
Gas pipeline, 24 inch (610 mm × 12.7 mm)187tonnes per kmCalculatedMethod
Gas pipeline, 20 inch (508 mm × 9.5 mm)117tonnes per kmCalculatedMethod
Onshore wind turbine tower150–180tonnes of plate per towerPublished6
Onshore wind turbine, complete225–285tonnes per turbinePublished6
Electricity transmission pylon5–15tonnes per pylonMCI estimate–
Offshore drilling rig~7,200tonnes per rigPublished1
Industrial water storage tank10–100+tonnes per tankMCI estimate–

Pipeline figures are pipe steel only, excluding coatings, fittings and valves; see the oil and gas assumptions in the end-use analysis. Wind turbine figures relate to 2–3 MW turbines (2011); today's larger turbines and taller towers use more steel. Data as of November 2026.

Railways, Roads and Bridges

Steel Content of Railways, Roads and Bridges
StructureSteel ContentUnitBasisRef.
Railway track, UIC60 rail (60.2 kg/m)120tonnes per track-kmCalculatedMethod
Railway track, UIC54 rail (54.8 kg/m)110tonnes per track-kmCalculatedMethod
Motorway crash barrier, W-beam~22tonnes per kmMCI estimate–
Motorway crash barrier, heavy duty30–40tonnes per kmMCI estimate–
Steel girder bridge, medium span100–475kg per m² of deckMCI estimate9
Reinforced concrete bridge deck20–60kg of rebar per m² of deckMCI estimate–
Howrah Bridge, Kolkata (1943)26,500tonnesPublished7

Railway track counts the two running rails only, not sleepers, fastenings or reinforcement in slab track; world rail demand was about 10 Mt in 2025 (see steel demand by product). Bridge steel varies mainly with span; see the National Steel Bridge Alliance curves (ref. 9). Data as of November 2026.

Buildings and Data Centres

Steel Content of Buildings and Data Centres
StructureSteel ContentUnitBasisRef.
Industrial building, single storey30–65kg per m² of floorMCI estimate–
Data centre floor construction~90kg per m² of floorPublished10
Data centre, 30 MW~4,000tonnes (~130 t per MW)Published10
Hyperscale data centre campus10,000–200,000+tonnes per campusPublished11

Data centre figures cover the building; transformers, generators, switchgear and cooling plant add more. AI-related investment is one of the drivers of steel demand growth outside China; see our steel market outlook 2027–2028. Data as of November 2026.


How the Figures Are Derived

  • Published figures are taken from the named source, converted to metric tonnes or kilograms and rounded. US industry figures in pounds are converted at 0.4536 kg per lb.
  • Railway track: two rails × rail mass per metre × 1,000 m. For UIC60 rail: 2 × 60.2 kg/m × 1,000 m = 120 t per track-km.
  • Pipelines: mass per metre (kg) = (outside diameter − wall thickness) × wall thickness × 0.02466, with dimensions in millimetres. For a 48-inch pipe with a 19.1 mm wall: (1,219 − 19.1) × 19.1 × 0.02466 = 565 kg/m, or 565 t per km. Wall thicknesses are typical for high-pressure transmission lines; actual walls depend on pressure and steel grade.
  • Vehicles and defence equipment come from the MCI steel end-use analysis, where each is used to size its sector.
  • MCI estimates are Metals Consulting International's best estimates where no reliable published figure was found. They are typical values; individual products vary widely.

All figures are steel in the finished product. To estimate the steel that was bought to make a product, including stamping, forging and machining scrap, or to convert imports of finished goods into steel tonnage, use our indirect steel demand coefficients by HS code.


Frequently Asked Questions

How much steel is in a car?

A typical petrol or diesel passenger car weighing about 1,440 kg contains about 830 kg of steel: about 667 kg of flat steel for the body and chassis and 163 kg of long products for the engine, transmission, suspension and wire. That is about 58% of the car's weight.

Does an electric car contain more or less steel than a petrol car?

Slightly less. In SteelOnTheNet's assessment a battery-electric car contains about 767 kg of steel, about 63 kg less than a petrol car, because it has no engine and a simpler gearbox. Its flat steel is the same, and steel in the battery enclosure can narrow the gap.

How much steel is in a washing machine or a fridge?

A top-loading washing machine contains about 43 kg of steel and an electric clothes dryer about 49 kg. A refrigerator contains from about 36 kg (top-freezer) to 69 kg (side-by-side), according to US industry data.

How much steel is in a tank?

A main battle tank contains about 55 tonnes of steel, mainly armour plate, forgings and castings. An infantry fighting vehicle or armoured personnel carrier contains about 10 tonnes.

How much steel is in a kilometre of railway or pipeline?

One kilometre of track with standard UIC60 rail contains about 120 tonnes of rail steel. A 48-inch high-pressure gas pipeline contains about 565 tonnes of steel per kilometre, and a 24-inch pipeline about 187 tonnes.

How much steel is in a wind turbine?

An onshore wind turbine of 2–3 MW uses about 225–285 tonnes of steel, of which 150–180 tonnes of heavy plate goes into the tower. Larger modern turbines use more.

How much steel does a data centre use?

About 90 kg of steel per square metre of floor, or about 4,000 tonnes for a 30 MW data centre (roughly 130 tonnes per MW). Hyperscale campuses range from about 10,000 tonnes to more than 200,000 tonnes.

Is steel content the same as the steel needed to make a product?

No. Steel content is the steel in the finished product. Manufacturers buy more, because some is lost as scrap: carmakers buy about 1.85 tonnes of steel for every tonne in the car. Our indirect steel demand page gives both figures by HS code.


References

  1. Metals Consulting International – global steel end-use analysis 2025 and workbook (cars, light commercial vehicles, trucks, buses, ships, containers, rigs, defence equipment), November 2026.
  2. ICCT – Closing the loop, March 2025 (about 800 kg of steel per car).
  3. IMT-IDDRI – Car-to-Car Steel, March 2025 (800–900 kg per car).
  4. American Iron and Steel Institute – Appliances (steel per appliance: room air conditioner 35.6 lb, electric range 106.8 lb, gas range 149.4 lb, top/bottom refrigerator 79.0 lb, side-by-side refrigerator 152.5 lb).
  5. Steel Recycling Institute – industry data on steel per appliance (top-load washer about 94.5 lb, electric dryer about 107 lb).
  6. ArcelorMittal – Update client magazine, May 2011 (225–285 t of steel per onshore turbine, 150–180 t of quarto plate in the tower).
  7. Howrah Bridge: 26,500 t of steel, of which about 23,000 t supplied by Tata Steel – The News Minute, citing Tata Steel's commemorative book Howrah Bridge: An Icon in Steel.
  8. DSV – dry container specifications (40 ft tare 3,750 kg); 20 ft tare about 2,200–2,300 kg from container operators' specifications.
  9. National Steel Bridge Alliance (AISC) – Steel Span to Weight Curves (steel per square foot of deck by span and girder spacing).
  10. Data Centre Magazine, July 2025 – Pure Data Centres Group (90 kg of steel per m² of floor; 4,000 t in a 30 MW data centre).
  11. World Economic Forum – Securing the data centre materials backbone, December 2025 (hyperscale campuses 10,000 t to over 200,000 t).

Health Warning and Terms of Use

The figures on this page are MCI best estimates: typical values compiled by Metals Consulting International Limited from published sources, standard calculations and MCI's own judgement. They are indicative only. Individual products and structures vary widely with design, size, specification and age, and some figures rest on limited evidence.

Users should supplement these figures with their own research, such as manufacturers' data, bills of materials, engineering drawings or project-specific quantities, and consult primary sources before relying on any figure for commercial, investment, engineering or policy decisions.

MCI and SteelOnTheNet make no warranty as to the accuracy, completeness or fitness for purpose of these figures, and accept no responsibility or liability for any loss arising from their use. They are not investment, financial, legal or engineering advice.

Use of this page is subject to our terms of use.

How to Cite This Page

Metals Consulting International (2026) 'Steel content of products and infrastructure', SteelOnTheNet. Available at: https://www.steelonthenet.com/resources/market-data/steel-content.html (Accessed: 21 November 2026).

Steel Demand Analysis for Your Project or Market

We can estimate the steel needed for a specific infrastructure programme, product range or national market, by product (plate, coil, sections, rebar, wire rod and tube) and by end-use sector.

Dr Andrzej M Kotas
Founder and CEO, SteelOnTheNet
Founder and CEO of SteelOnTheNet and Managing Director of Metals Consulting International, specialising in steel market analysis, feasibility studies and industry restructuring for Big 4 accounting firms, major management consultancies, governments and corporations – see feasibility appraisal and steel industry restructuring pages. View Profile →

Need This Analysis for Your Own Plant or Market?

152 projects in 48 countries since 2001

Free, confidential first conversation No obligation Reply within one working day